Name: China Customized Pulse Electric Fence System Manufacturers Suppliers Factory - Good Price - Yuzhong Electronic Technology
Brand: Yuzhong
SKU: 280899073

Protect your property with our reliable pulse electric fence. Designed for ultimate security, it delivers intermittent high voltage pulses to deter intruders without causing harm.

Energy efficient, cost effective, and easy to install, our pulse fences offer unmatched durability and protection, ensuring peace of mind for residential, commercial, and agricultural applications. Keep your perimeter secure around the clock!

Product overview

The intelligent pulse electric fence, generally installed on the perimeter wall with wall hanging or floor installation, and also can be placed in the control room or the guard room. The energize generate the pulse, and the pulse is transmitted to front-end alloy wire through high-voltage insulated wires. This system provides a robust security barrier. In case of climbing or destruction, it will cause a short circuit between two adjacent alloy wires, triggering the alarm immediately.

The pulse electric fence serves dual purposes of blocking intruders and deterring potential breaches and its design ensure the pulses non-lethal yet effective

Product Components

Yuzhong Pulse Electric Fence System

Pulse energizer+Front accessories+Terminal Part+Transmission+Control Panel

Communication Structure - Product Introduction - Pulse Energizer

Single Zone Energizer

Dual Zone Energizer

Four-zone Energizer

Six-zone Energizer

Network-Type Energizer

01/

Allocation Solution：For example, for a perimeter of 1000 meters, if divided into 100-meter sections as one defense zone, it would be divided into 10 defense zones. Generally, 5 dual-zone main machines are used, or 4 dual-zone main machines plus 2 single-zone main machines are adopted; if divided into 200-meter sections, it would be divided into 5 defense zones, and generally 2 dual-zone main machines plus 1 single-zone main machine are used.

02/

Pulse Energizer：

ABS engineering plastic

485 type - network type

Chinese liquid crystal display

Each defense zone can be independently activated and deactivated

Technical parameters comply with national standards

Control energizer and software

Control Energizer

LCD display

One-click activation/deactivation of security

High and low voltage switching control

Display of alarm zone activation voltage

Change of alarm zone number

Configure dual remote controllers

Control Software

User-friendly operation interface
One-click activation and deactivation of security
High/low voltage switching control
Display of security zone activation voltage
Change of security zone number
Built-in electronic map function

Allocation Solution

Generally, an electronic fence system can be controlled by one control unit or software, or both can be used simultaneously. The network version system employs a network-type control unit and software.

Linkage Equipment Electronic Map

Linkage Module

16-channel switch output

Normally open and normally closed adjustable

Linked with electronic map and video surveillance

Wall-mounted electronic map

Frameless screen Acrylic material

Wall thickness: 5mm

When an alarm occurs, the colored lights will light up immediately

Clearly indicates the location of the alarm

Allocation Solution

The electronic maps and video linkage both require the use of corresponding linkage modules. One system is configured with one set of such modules. These are non-essential devices.

Product Introduction-Front-end accessories

Terminal Pole：

Aluminum alloy material, with a wall thickness of 2MM

Surface treated with an oxide film

Straight type and L type options available

Customizable with an extended rod
Base：

Aluminum alloy wall thickness: 3MM

Insulator and waterproof cap：

New material ABS engineering plastic

Available in three colors: blue, gray and black

Loading-Bearing Pole：
Aluminum alloy material, with a wall thickness of 1.6MM
Surface treated with an oxide film
Straight type and L type options available
Customizable with an extended rod
Base：
Aluminum alloy wall thickness: 3MM
Insulator and waterproof cap：
New material ABS engineering plastic
Available in three colors: blue, gray and black

Centre Pole：
FRP diameter 9.5MM
Solid material can be customized with an extended rod
Base：
Aluminum alloy wall thickness: 3MM
Insulator and waterproof cap：
New material ABS engineering plastic
Available in three colors: blue, gray and black

Allocation Solutions：

Number of terminal poles: Generally, two per defense zone, two at each corner or at each elevation change, and two at each gate. (Number of defense zones * 2 + Number of corners * 2 + Number of gates * 2)
Number of load-bearing poles: Generally, one every 20 meters. (Perimeter / 20)
Number of middle poles: Generally, one every 4 meters or for all other poles except those where terminal poles and load-bearing poles are installed, one pole per pole. (Perimeter / 4 - Number of terminal poles - Number of load-bearing poles)

Alloy wire

Aluminum-magnesium alloy

Diameter 2MM

Multi-strand

400 meters or 500 meters per reel

High-voltage cable

Double shielding layer
Diameter 2MM
Multi-strand
50 meters or 100 meters per roll

Alarm

Sound and Light Alarm

Alarm Sound: 90 decibels

Rainproof Type

Equipped with a dedicated base

Fuses

Three-layer fuse
10KV conductive
One-time formed circuit
Equipped with stainless steel bracke

Connector

Aluminum alloy material

Double-threaded design

Used for fastening wires

Tensioner

New material manufacturing

Small-tooth tensioner

Available in blue, gray and black colors

Warning sign

PVC material 150*250MM

Dual-sided display

Patented product

Rainproof box

Stainless steel material 400*500*180CM

Side ventilation holes

Roof slope design

Configuration plan

Alloy wire: Circumference * Number of wires. (4 wires or 6 wires)
High-voltage wire: 25 meters per zone. (Number of zones * 25 meters)
Alarm number: One per zone. (= Number of zones)
Lightning arrester: One per zone. (= Number of zones)
Wire connector: 16 per zone. (= Number of zones * 16)
Tightening device: 8 per zone. (= Number of zones * 8)
Warning sign: One every 10 meters. (= Circumference / 10 meters)
Rainproof box: One per host. (= Number of hosts)

Product System Features

Designed in accordance with GB/T7946-2015 "Installation and safe operation of pulse electronic fence".
7 inch LCD screen display, real-time display of the working status of the defense area in English , touch the button can directly set the energizer voltage adjustment, deployment and withdrawal Settings and defense area number change.
Network device, the pulse energizer has its own network port, cross-network segment self-adaptation, No additional network modules or auxiliary devices are required.
Adjustable alarm duration: The alarm signal duration of the energizer can be adjusted within the range OS-999S, and the working time of the sound and light alarm can be flexibly configured.
Power failure memory: The energizer automatically remembers the original working status and parameter Settings. After a power failure, you do not need to set them again to avoid errors and troubles.
Heartbeat mechanism: The energizer periodically sends heartbeat communication information for the system to detect and identify the online status of the energizer.
The main circuit board of the dual intelligent terminal adopts the dual high pressure pack independent working system, which can set one high pressure and one low pressure at the same time without interfering with each other.
BI-Polar® : The unique BI-Polar® technology can make sure 5000V~10000V high-voltage pulse electricity on each line and each point of the front fence, so that intruders have no chance to take advantage of.
The system has a torque sensing function, memorizing and detecting the equilibrium torque value on each line.When the torque value changes, regardless the change is cuased by insulated or non-insulated, it can send an alarm signal in real time, sensitivity and holding time can be adjusted.
The system has a mature control application scheme and linkage application scheme.

Product Parameters

Powered Parameter	Power source	AC220V/AC24V, +10%-10%
Powered Parameter	System Power Consumption	20W
Working Environment	Temperature	-40+50℃
Working Environment	Humidity	≤70%
Output Parameter	Output High Voltage Peak	5KV-10KV
	Output Low Voltage Peak	700-1000V
	Pulse Current Peak	＜10A
	Pulse Duration	＜0015
	Pulse Interval time	1s-1.5s
	Single Pulse Output Maximum Power	2.5mc
	Single Pulse Output Maximum Energy	≤5J
	Alarm Reasonse Time	＜2s

Product Advantages

All the devices on the backend have network interfaces. The pulse host does not need to be wired separately; it can be directly connected to the nearby monitoring switch.

The method of torque judgment is adopted. The torque values on the previous section are detected and memorized. An alarm is triggered immediately if there is any change, regardless of whether it is caused by an insulator or a non-insulator.

The more sensitive resistance identification technology will trigger an alarm signal when the front alloy wire is damaged, as the resistance value will change.